Corbin HD-FLH-9-W-CA The Wall Seat W/ America Pattern For Harley Touring (2009-)

Corbin’s HD-FLH-9-W-CA The Wall Seat with Corbin’s America Pattern is made specifically for Harley-Davidson Touring (2009-current).

• Measurements: Rider Seating: 13″ wide x 14″ long
• Back support: 6.5″
• The Wall highback Gunfighter design for HD Touring Models.
• Fast, solo look and superior back support for rider.
• Sculpted seating position gives excellent weight distribution.
• Fits perfect and conforms to the tank, chassis and fender of the Baggers.
• Fastback tail section is padded and upholstered to provide for short trip passengers.
• Cut low to provide good ground reach at stop signs.
• More square inches of body contact means better weight distribution.
• Available with a wide range of color and material options at no extra charge.
• Fits perfect and matches up to the factory dash.
• Includes genuine leather seating and endless custom possibilities.
• Mounts easily with a tongue in the front and a single bolt into the fender at the rear.
• For tool free installation, use one of our Stainless Steel Thumbscrews in the fender mount point.
• Installs easily with a tongue in the front and a single bolt into your fender at the rear. For tool free installation, use one of our stainless steel thumbscrews.

• Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

We call this newest incarnation of the classic Corbin fastback “The Wall” because of the impressive vertical back support brought about by the raised tail section. Big Mike (of BMC Motorcycle Company fame) came to us for a series of seats with a taller and more vertical back area that would hold the rider in position more aggressively. Rumor has it he wanted this for stunt riders, but we’ve found this works extremely well for hot rodded bikes and cafe racers where a less reclined posture is desired.

As far as passengers are concerned, the tail of the Wall saddle is padded and upholstered to provide for short trips. Although this is built with the same quality foam material as the rider’s area, the shaping is designed primarily for looks and rider back support. When taking a passenger make sure you tell them to hold on tight!

Up front, the ergonomically designed platform increases the area of body contact to disperse rider weight evenly and eliminate hot spots. Dished in the center to eliminate pressure on the tail bone. At the nose of the saddle we sculpt it narrow to provide for good ground reach.

As always, our exclusive Comfort Cell foam provides resilient comfort and a low seating platform for a slim profile. High density foam provides a long lasting ride and plenty of support. The entire saddle touches your Harley ONLY with rubber bumpers to protect your paint job. Provides a perfect fit and contours the crown and profile of the fender.

Includes genuine leather seating panels in your choice of colors and styles for a truly distinctive touch. Leather seating is best because it breathes with your body and will conform with the foam shape for a personalized fit after break in. Leather is also extremely durable for years of enjoyment. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.

Corbin America cover pattern available for all Wall and Gunfighter saddles.

The Wall saddle installs on your bike using a tongue in the front and a single bolt into your fender at the rear. For a very clean and simple, tool free installation, use one of our machined stainless steel thumbscrews at the rear. Available in a variety of sizes to suit multiple needs. The seat install location on your Bagger uses a 1/4″ x 20 thread, so the appropriate thumbscrew is #ACST-20.

The finest and most comfortable motorcycle saddles available. Manufactured with pride in the USA.

Electra Glide & Ultra models without Tour Pak (2014-current)

Electra Glide, Ultra, Ultra Classic, Ultra CVO (2009-2013)

FLHX Street Glide (2009-2022)

Road Glide (2009-2022)

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don’t telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn’t break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle’s foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell… more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.